HP ENVY 100 Firmware

HP Envy 100 Inkjet Cartridges

HP ENVY 100 Driver and Software Download For Windows 7, Windows Vista, Mac OS X 10.14, Mac OS X 10.13, Mac OS X 10.12, Mac OS X 10.11, Mac OS X 10.10, Mac OS X 10.9.

“electronicipc.com” thrives to be a reliable place where you can get any kind of drivers from, especially for HP ENVY 100 Driver. Those looking for drivers or software for this type of printer is the latest version.

HP ENVY 100 Device Recovery Tool for resetting the device from an unresponsive state caused by the wireless network firmware update.

This tool will reset a device from an unresponsive condition where the device Front Panel displays the message “Do Not Power Down during Update”. This issue may occur when wireless connectivity is lost during a web services product firmware update. It is critical that you read all of the install instructions before using this tool. You may want to print the instructions prior to running the tool.

Fixed Issues:

This tool fixes an error condition in your device firmware, where the device front panel becomes unresponsive and displays “Do not Power Down during Update” message.

Driver Detail
Type: Firmware
Version: 1.0
Release date: Mar 31, 2011
Filename: D410Envy_FWUpdate_4684_HPCOM_x64_v2.exe

Operating Systems:
Microsoft Windows 7 (64-bit)
Microsoft Windows 7 Enterprise (64-bit)
Microsoft Windows 7 Home Basic (64-bit)
Microsoft Windows 7 Home Premium (64-bit)
Microsoft Windows 7 Professional (64-bit)
Microsoft Windows 7 Ultimate (64-bit)
Microsoft Windows Vista (64-bit)
Microsoft Windows Vista Business (64-bit)
Microsoft Windows Vista Enterprise (64-bit)
Microsoft Windows Vista Home Basic (64-bit)
Microsoft Windows Vista Home Premium (64-bit)
Microsoft Windows Vista Ultimate (64-bit)
File Size: (0.6 MB)

HP ENVY 100 Firmware Installation Instructions

Before Starting:

  • A working printer software installation on your PC is required to install this tool.
  • If your printer is connected using a wireless connection and this update fails to install, please connect your printer to your PC with a USB cable and try again. You can switch back to using your wireless connection after the update is complete (see instructions below).
  • This utility is reusable. Please save it on your system in case you need it in the future.

Device Recovery Tool Steps:

  1. Download the Device Recovery Tool to an appropriate location on your system.
  2. Double click on the downloaded file to start the extraction and installation.
  3. In Windows Vista or Windows 7 operating systems, you may be prompted to enter Administrator credentials if your login privileges do not have administrator rights. If you are an administrator, you may be prompted for permission to continue with the installation. Please select to continue the process.
  4. Follow the on-screen instructions to perform the installation. If you see the success screen with the following message at the end of the installation, “Device Update Successful”, press the “Close” button to finish the printer reset.
  5. Wait 30 seconds
  6. Turn off your device by pressing the power button. If the unit does not power down, turn off your printer by disconnecting the printer from the A/C power outlet.
  7. Reconnect your printer back to the A/C power outlet. Your device will be ready after the restart is complete.

Note: If your printer was originally installed using a wireless connection and you switched to a USB connection to install this Recovery Tool, follow these steps to change the“Default Printer” setting to restore the wireless connection as the default printer.

  1. Navigate to the operating system “Printers” or “Devices and Printers” folder (varies based on your operating system).
  2. Right-click on the printer you would like to set as default printer. Select the “Set as default printer” option.
  3. (Optional)Additionally, you can delete the printer icon for the USB printer connection you created. The additional icon for the USB connection to the printer will not harm your system, but will not be a functional connection for your printer unless you leave the USB cable connected. To delete, find the printer icon connected through USB in the “Printers” or “Devices and Printers” folder. Right-click on the printer icon and select “Delete”. Please make sure that your wireless connected printer is working before deleting the USB printer icon.

HP Printer Driver for macOS

HP Easy Start

HP Easy Start is the new way to set up your HP printer and prepare your Mac for printing. HP Easy Start will locate and install the latest software for your printer and then guide you through printer setup.

Fixed Issues:

  • By default disable data collection checkbox for Germany as per GDPR(General Data Protection Regulation)
  • Added support of 10.14 OS
  • Fixed installation failure issue on 10.14
  • Optimized the code to fix download failure

Driver Detail

Type: Driver
Release date: Sep 24, 2018
Filename: HP_Easy_Start.app.zip

Operating Systems:

macOS 10.14
Mac OS X 10.10
Mac OS X 10.11
Mac OS X 10.12
Mac OS X 10.9
macOS 10.13
File Size: (9.1 MB)

Leave a Reply

Notify of
Do NOT follow this link or you will be banned from the site!